Black peppercorns with a wooden scoop and bowls

pepper

550 G/L vs 570 G/L Black Pepper: Which Grade to Buy

A practical comparison of two adjacent Vietnamese black pepper export grades - density, handling, packing behaviour and the situations each one suits.

550 G/L and 570 G/L sit next to each other in the Vietnamese export grade ladder, and buyers regularly ask which one to take. Both are machine-cleaned black pepper with the same moisture and admixture ceilings, so the choice is not about quality thresholds. It is about handling, packing behaviour and how the lot performs in the buyer’s process.

Where the difference comes from

Density reflects how full and heavy the peppercorn is in a defined volume. A 570 G/L lot is denser, which means more pepper mass for the same volume. A 550 G/L lot is slightly looser, which means it flows more freely and fills a bag more completely.

That single physical difference produces most of the practical consequences.

Handling and flow

Looser pepper - the 550 G/L position - moves more easily. It fills small packers, hand-filling points and irregular bags with fewer bridging problems. If part of your line handles product by hand or in small packs, the lower-density grade tends to be the easier one to run.

Denser pepper - the 570 G/L position - is heavier per litre. It tends to pack down in a bag faster, which is useful when the goal is weight per container rather than volume per bag.

Where each one is usually chosen

Situation Usually chosen Why
Repacking into small consumer packs 550 G/L Flows more easily into small packers
Industrial blending, tight tolerance on foreign matter 570 G/L Denser, cleaner-feeling lot, weight per volume
Maximising weight per container 570 G/L More product mass in the same volume
Hand filling or gravity packing points 550 G/L Less bridging, easier fill
Contract spec already fixed As specified Avoids re-approval on the buyer side

The cost side

Denser grades usually sit at a different commercial level from the lower grades, because they represent a smaller share of available lots. The difference between adjacent grades is typically smaller than the loss a buyer takes on a rejected container, which makes the admixture ceiling the more important number to specify - not the last decimal of density.

How to decide without over-thinking it

  1. If your process has an existing approved specification, buy that grade. Changing grade means re-approving on your side.
  2. If you are building a new line and packing small packs, start with the lower-density grade.
  3. If freight or container space is the dominant cost, evaluate the higher-density grade against your container plan.
  4. State the admixture ceiling either way. It is the parameter that determines whether the lot passes your incoming check.

The published grade table, including both of these grades with their ceilings, is on the pepper product page. For where density comes from, see black pepper grades explained.

Frequently asked

How is Vietnamese black pepper graded?

Pepper is graded by density, expressed in grams per litre (G/L), together with a moisture ceiling and an admixture ceiling. The grades MKPRO quotes against are 500 G/L, 550 G/L, 570 G/L, 600 G/L and 620-625 G/L. Higher density grades are denser and heavier within the same volume.

What is the difference between FAQ 550 G/L and FAQ 570 G/L pepper?

Both are export grades of Vietnamese black pepper with the same moisture and admixture ceilings, but 570 G/L is denser. A buyer choosing between them is usually choosing between two positions in the same lot: 550 G/L is easier to fill and flows more freely, while 570 G/L gives a higher weight per volume for the same packing format.

  • Vietnam Pepper Black and white pepper supplied by export grade, with defined density, moisture and admixture limits.

Keep reading

Get a quote

Pick the product you need and send the request. We reply with specification, packing options and a quotation - ask for a sample in the same request.

Get a Quote